PUR 벌크 멜터 접착제 교체시주의 사항은 무엇입니까?

1. 완료 후PUR 핫멜트 접착제, 기다려야합니다.PUR 벌크 멜터기어 펌프와 모터를 시작하고 기어 펌프와 모터를 즉시 생성하여 기어 펌프를 형성하여 PUR 벌크 멜터의 수명을 단축합니다.

2, when the PUR 벌크 멜터 is sorted, it is necessary to detach the hot melt glue heating plate and the PUR hot melt tube, and the PUR hot melt rubber tub is detached from the PUR bulk melter, and should be inside the lifting In the case of pressure, all power is cut off.

3, PUR 벌크 멜터 is in the dessert bucket, the incoming air pressure should be subjected to a small to large gradually pressurized, and without the direct use of high pressure gas directly, it is not allowed to prevent the event.

4, when the PUR 벌크 멜터, the operator needs to wear special high-temperature protection clothing, with high temperature gloves, can not contact the skin to contact the hot melt tub, melt PUR hot melt glue, and heat transfer plates Prevent burn.

5. When the PUR 벌크 멜터  is separated from the polyurethane hot melt bucket, the special mechanism of the PUR bulk melter is needed to close the pressure plate and the pump body before consolidating the PUR hot sol satum. Channels to prevent curing.